- SMT labelling machines
- Multi-station labelling machines
- High precision labelling machines
- PCB labelling machines
- Pallet labelling machines
- Automatic labelling machines
- High-speed labelling machines
- Double-sided labeling machine
- Self-adhesive labeling machine
- FPC adhesive backing machine
- Mobile phone adhesive backing machine
- speaker sticker backing machine
- Automatic backing machine
- Automatic adhesive backing machine
- Search
Qintech ATM-250NE Automatic Accessories Laminating Machine
- Product：Qintech ATM-250NE Automatic Accessories Laminating Machine
- Catalogue：Accessory labelling machines
- Views：177766times
- Update：2022/5/5 14:23:40
- Call：133-6065-4218
ATM-250NE automatic auxiliary material labeling machine is a labeling machine independently developed and produced by
Guangdong Qintaisheng Intelligent Technology Co., Ltd. It is mainly used for labeling, backing, mylar, potted sheet and other
auxiliary materials on PCB optical board; the placement accuracy is around ±0.1mm, the size of PCB optical board is 250*330mm
; bottom vision: a high precision camera is used to ensure the clarity of the head image and the head mark point's compensation value.
I. Automatic auxiliary material mounting machine hardware description - equipment appearance general picture
Two, fully automatic auxiliary material loading machine hard body description - Feeder roll material requirements
1. The maximum width of standard Feeder base paper is 70mm, more than that need to be customized.
2. arrangement of auxiliary materials: matrix arrangement X spacing ≥ 1.2mm (the number of even) Y direction spacing ≥
1.5mm.
3. safety distance of ≥ 2mm from the edge of the auxiliary material.4. auxiliary material cutting to be complete, and can not damage the backing, auxiliary material without overflow glue.
5. the die-cutting strength of the release paper should not be too large, if there are scars on the release paper, it is easy to
tear when peeling.
6. the thickness of the release paper recommended ≤ 0.05mm and soft material is easier to peel.7. If a part of the label is not sticky, the non-sticky part should be peeled off first.
8. rectangular labels should be fed in the direction of the wide side and the long side should be peeled off.
9. The following is based on a previous customer to do the material for reference.
3. The soft body of the fully automatic auxiliary material labelling machine is explained - part of the soft body screenshot
4、Full-automatic auxiliary material assembly machine soft body description - soft body process
Automatic board feeding → head vision photo positioning → nozzle picking up material → bottom vision compensation →
paste material → automatic board discharge (head vision photo positioning continues the cycle)
5、Functional and technical parameters of the automatic auxiliary material fitting machine
Mounting efficiency MAX:1.3S/PCS (without in/out board, according to the standard test mode)
PCB/carrier size (L*W): Max:250*330mm Min:100*100mm
Accessories size: Max:40*30mm /Min:3*3mm
FEEDER configuration: Configuration of 2
FEEDER (feeder) width: width to meet ≤ 70mm below the material tray free switch
Vision: two sets of upper and lower CCD alignment system
Special optional configuration: soft experience automatic statistics of running time, production capacity and other production
information, optional SFC/MES, system reserved for network interface
